International Journals

​

2020

​

[J-7] E. Massoni, M. Bozzi, and L. Perregrini, "Substrate Integrated Waveguide Two-Modes Coaxial Launcher," IEEE Transactions on Microwave Theory and Techniques. (submitted)

​

2019

​

[J-6] E. Massoni, M. Bozzi, and K. Wu, “Increasing the Efficiency of Leaky-Wave Antennas by Using the Substrate Integrated Slab Waveguide,” IEEE Antennas and Wireless Propagation Letters, Vol. 18, No. 8, pp. 1596-1600, Aug. 2019.

​

2018

​

[J-5] H. Abdel Ali, E. Massoni, L. Silvestri, M. Bozzi, L. Perregrini, and A. Gharsallah, "Increasing the Bandwidth of Cavity-Backed SIW Antennas by Using Stacked Cavities," International Journal of Microwave and Wireless Technologies, Vol. 10, No. 8, pp. 942-947, Oct. 2018.

​

[J-4] E. Massoni, G. Siciliano, M. Bozzi, and L. Perregrini, “Enhanced Cavity Sensor in SIW Technology for Material Characterization,” IEEE Microwave and Wireless Components Letters, Vol. 28, No. 10, pp. 948–950, Oct. 2018.

​

2017

​

[J-3] L. Silvestri, E. Massoni, C. Tomassoni, A. Coves, M. Bozzi, and L. Perregrini, "Substrate Integrated Waveguide Filters Based on a Dielectric Layer with Periodic Perforations," IEEE Transactions on Microwave Theory and Techniques, Vol. 65, No. 8, pp. 2687–2697, Aug. 2017.

 

[J-2] E. Massoni, M. Bozzi, and K. Wu, “A New Start: The MTT-S Student Branch Chapter at the University of Pavia,” IEEE Microwave Magazine, Vol. 18, No. 4, pp. 132-134, June 2017.

​

[J-1] E. Massoni, L. Silvestri, G. Alaimo, S. Marconi, M. Bozzi, L. Perregrini, and F. Auricchio, "3D-Printed Substrate Integrated Slab Waveguide for Single-Mode Bandwidth Enhancement," IEEE Microwave and Wireless Components Letters, Vol. 27, No. 6, pp. 536-538, June 2017.

​

International Conferences

​

2018

​

[C-14] E. Massoni, "Leaky Wave Antennas in Substrate Integrated Waveguide Technology for 5G Applications," IV International Forum on Research and Technologies for Society and Industry (IEEE RTSI 2018), Palermo, Italy, Sept.10-13, 2018. (SB@RTSI 2018)

 

[C-13] E. Massoni, N. Delmonte, G. Macchiarella, L. Perregrini, and M. Bozzi, “Half-mode SIW Filters with Resonant Couplings Implementing Transmission Zeros,” 2018 IEEE MTT-S International Microwave Symposium (IMS2018), Philadelphia, PA, USA, 10-15 June 2018.

​

2017

​

[C-12] M. Bozzi, E. Massoni, G. M. Rocco, C. Tomassoni, and L. Perregrini, “New Materials and Fabrication Technologies for Substrate Integrated Waveguide (SIW) Components,” Progress In Electromagnetics Research Symposium (PIERS 2017), Singapore, Singapore, 19-22 Nov. 2017 (invited paper).

​

[C-11] G. Macchiarella, C. Tomassoni, E. Massoni, M. Bozzi, and L. Perregrini, “A Novel Class of Half-Mode SIW Filters with Extracted Poles,” 47th European Microwave Conference (EuMC2017), Nuremberg, Germany, Oct. 8–13, 2017.

​

[C-10] E. Massoni, P. F. Espin-Lopez, M. Pasian, M. Bozzi, L. Perregrini, G. Alaimo, S. Marconi, and F. Auricchio, “3D-printed Chalk Powder for Microwave Devices: Experimental Results for a NRD-guide in Ku-Band,” 47th European Microwave Conference (EuMC2017), Nuremberg, Germany, Oct. 8–13, 2017.

​

[C-9] S. Di Meo, E. Massoni, L. Silvestri, J. Obbad, M. Pasian, D. Dondi, M. Bozzi, L. Perregrini, G. Alaimo, S. Marconi, and F. Auricchio, “Dielectric Characterization of Material for 3D-printed Breast Phantoms up to 50 GHz: Preliminary Experimental Results,” IEEE MTT-S International Microwave Workshop Series-Advanced Materials and Processes (IMWS-AMP 2017), Pavia, Italy, 20-22 Sept. 2017.

​

[C-8] E. Massoni, P. F. Espin Lopez, M. Pasian, M. Bozzi, L. Perregrini, S. Marconi, G. Alaimo, and F. Auricchio, “Additive Manufacturing of a Chalk Powder NRD 3-port Junction via Binder Jetting Technology,” IEEE MTT-S International Microwave Workshop Series-Advanced Materials and Processes (IMWS-AMP 2017), Pavia, Italy, 20-22 Sept. 2017.

​

[C-7] E. Massoni, M. Bozzi. L. Perregrini, U. Anselmi Tamburini, and C. Tomassoni, “A Novel Class of High Dielectric Resonator Filters in Microstrip Line Technology,” IEEE MTT-S International Microwave Workshop Series-Advanced Materials and Processes (IMWS-AMP 2017), Pavia, Italy, 20-22 Sept. 2017.

​

[C-6] E. Massoni, M. Guareschi, M. Bozzi. L. Perregrini, C. Tomassoni, U. Anselmi Tamburini, G. Alaimo, S. Marconi, and F. Auricchio, “3D Printing and Metalization Methodology for High Dielectric Resonator Waveguide Microwave Filters,” IEEE MTT-S International Microwave Workshop Series-Advanced Materials and Processes (IMWS-AMP 2017), Pavia, Italy, 20-22 Sept. 2017.

​

[C-5] E. Massoni, "Fabrication Procedures for Microwave Devices by Additive Manufacturing and 3D Printing Techniques," III International Forum on Research and Technologies for Society and Industry (IEEE RTSI 2017), Modena, Italy, Sept.11-13, 2017. (SB@RTSI 2017)

​

2016

​

[C-4] L. Silvestri, E. Massoni, C. Tomassoni, A. Coves, M. Bozzi, and L. Perregrini, "A New Class of SIW Filters Based on Periodically Perforated Dielectric Substrate," 46th European Microwave Conference (EuMC2016), London, UK, Oct. 3–7, 2016.

​

[C-3] L. Silvestri, E. Massoni, C. Tomassoni, A. Coves, M. Bozzi, L. Perregrini, "Modeling and Implementation of Perforated SIW Filters," IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO2016), Beijing, China, July 27-29, 2016.

​

[C-2] E. Massoni, L. Silvestri, M. Bozzi, L. Perregrini, G. Alaimo, S. Marconi, and F. Auricchio, "Characterization of 3D-Printed Dielectric Substrates with Different Infill for Microwave Applications," IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP 2016), Chengdu, China, July 20-22, 2016.

​

[C-1] M. Bozzi, S. Moscato, L. Silvestri, E. Massoni, N. Delmonte, G.M. Rocco, M. Pasian, L. Perregrini, and C. Tomassoni, "Novel Materials and Fabrication Technologies for SIW Components for the Internet of Things," 2016 IEEE International Workshop on Electromagnetics: Applications (iWEM2016), Nanjing, China, May 16-18, 2016 (invited paper).

​

National Conferences

​

2018

​

[N-4] E. Massoni, L. Silvestri, G. Alaimo, S. Marconi, M. Bozzi, L. Perregrini, and F. Auricchio, "Additive Manufacturing of a Substrate Integrated Slab Waveguide for Single-Mode Bandwidth Enhancement," XXII Riunione Nazionale di Elettromagnetismo (XXII RiNEm), Cagliari, Italy, Sept. 3-8, 2018.

 

[N-3] L. Silvestri, E. Massoni, C. Tomassoni, A. Coves, M. Bozzi, and L. Perregrini, “Substrate Integrated Waveguide Filters Based on Periodic Perforations of the Dielectric Layer”, XII Iberian Meeting on Computational Electromagnetics (EIEC2018), Coimbra, Portugal, 15-18 May 2018.

​

2016

​

[N-2] E. Massoni, L. Silvestri, S. Moscato, M. Pasian, M. Bozzi, L. Perregrini, "Additive Manufacturing of Substrate Integrated Waveguide Components," XXI Riunione Nazionale di Elettromagnetismo (XXI RiNEm), Parma, Italy, Sept. 12-14, 2016.

 

[N-1] L. Silvestri, E. Massoni, M. Bozzi, L. Perregrini, C. Tomassoni, and A. Coves, "SIW Filters Based on Perforated Dielectric Substrate," XXI Riunione Nazionale di Elettromagnetismo (XXI RiNEm), Parma, Italy, Sept. 12-14, 2016.

​

​